Sam Wilson Captain America Wings *PATTERN PACK*
$35.00
READ BEFORE BUYING!
*This is only a PATTERN for the wings, not the wings themselves*
This pack includes:
- Wing templates (PDF format)
- Wing layout reference (PDF format)
- 3D files for wing hinges
- link to my custom Cricut patterns
- part list
- instructions
- 3D file for my custom modeled jetpack
*files are accessible via google drive link in a word doc. this is what you will receive when you purchase, message me if you have trouble accessing anything!*
KEEP IN MIND: This is a complex build. I have been building these for a while now, they're time consuming and very tedious/detail oriented. The blueprints are also not finished since I am designing as I go, which is why this file is so cheap. Since it is one of the only patterns for the wings out there though, I wanted to make it available for those who wanted to try it out for themselves.
The parts listed are not required for this build but are recommended, as they are what I used to make moving pulley activated wings. You can make the wings fully solid by choice. They are just suggestions based on what I have been doing for my commission build.
I recommend AT LEAST a 30% infill for the hinge pieces, printed in a strong material such as PETG as it will need to be a strong part, and a lower infill for the jetpack to help make it light.
Make sure if you scale the wings you also scale the jetpack file to match! everything is 1:1 as is.
*Print template file in POSTER MODE, this will give you a ton of sheets but this is how you print it to scale.*
I am currently in the process of designing a back rig for the wings for the jetpack to fit over and will update the folder when those blueprints are available.
Updated as of 6/16/22
*This is only a PATTERN for the wings, not the wings themselves*
This pack includes:
- Wing templates (PDF format)
- Wing layout reference (PDF format)
- 3D files for wing hinges
- link to my custom Cricut patterns
- part list
- instructions
- 3D file for my custom modeled jetpack
*files are accessible via google drive link in a word doc. this is what you will receive when you purchase, message me if you have trouble accessing anything!*
KEEP IN MIND: This is a complex build. I have been building these for a while now, they're time consuming and very tedious/detail oriented. The blueprints are also not finished since I am designing as I go, which is why this file is so cheap. Since it is one of the only patterns for the wings out there though, I wanted to make it available for those who wanted to try it out for themselves.
The parts listed are not required for this build but are recommended, as they are what I used to make moving pulley activated wings. You can make the wings fully solid by choice. They are just suggestions based on what I have been doing for my commission build.
I recommend AT LEAST a 30% infill for the hinge pieces, printed in a strong material such as PETG as it will need to be a strong part, and a lower infill for the jetpack to help make it light.
Make sure if you scale the wings you also scale the jetpack file to match! everything is 1:1 as is.
*Print template file in POSTER MODE, this will give you a ton of sheets but this is how you print it to scale.*
I am currently in the process of designing a back rig for the wings for the jetpack to fit over and will update the folder when those blueprints are available.
Updated as of 6/16/22
READ BEFORE BUYING!
*This is only a PATTERN for the wings, not the wings themselves*
This pack includes:
- Wing templates (PDF format)
- Wing layout reference (PDF format)
- 3D files for wing hinges
- link to my custom Cricut patterns
- part list
- instructions
- 3D file for my custom modeled jetpack
*files are accessible via google drive link in a word doc. this is what you will receive when you purchase, message me if you have trouble accessing anything!*
KEEP IN MIND: This is a complex build. I have been building these for a while now, they're time consuming and very tedious/detail oriented. The blueprints are also not finished since I am designing as I go, which is why this file is so cheap. Since it is one of the only patterns for the wings out there though, I wanted to make it available for those who wanted to try it out for themselves.
The parts listed are not required for this build but are recommended, as they are what I used to make moving pulley activated wings. You can make the wings fully solid by choice. They are just suggestions based on what I have been doing for my commission build.
I recommend AT LEAST a 30% infill for the hinge pieces, printed in a strong material such as PETG as it will need to be a strong part, and a lower infill for the jetpack to help make it light.
Make sure if you scale the wings you also scale the jetpack file to match! everything is 1:1 as is.
*Print template file in POSTER MODE, this will give you a ton of sheets but this is how you print it to scale.*
I am currently in the process of designing a back rig for the wings for the jetpack to fit over and will update the folder when those blueprints are available.
Updated as of 6/16/22
*This is only a PATTERN for the wings, not the wings themselves*
This pack includes:
- Wing templates (PDF format)
- Wing layout reference (PDF format)
- 3D files for wing hinges
- link to my custom Cricut patterns
- part list
- instructions
- 3D file for my custom modeled jetpack
*files are accessible via google drive link in a word doc. this is what you will receive when you purchase, message me if you have trouble accessing anything!*
KEEP IN MIND: This is a complex build. I have been building these for a while now, they're time consuming and very tedious/detail oriented. The blueprints are also not finished since I am designing as I go, which is why this file is so cheap. Since it is one of the only patterns for the wings out there though, I wanted to make it available for those who wanted to try it out for themselves.
The parts listed are not required for this build but are recommended, as they are what I used to make moving pulley activated wings. You can make the wings fully solid by choice. They are just suggestions based on what I have been doing for my commission build.
I recommend AT LEAST a 30% infill for the hinge pieces, printed in a strong material such as PETG as it will need to be a strong part, and a lower infill for the jetpack to help make it light.
Make sure if you scale the wings you also scale the jetpack file to match! everything is 1:1 as is.
*Print template file in POSTER MODE, this will give you a ton of sheets but this is how you print it to scale.*
I am currently in the process of designing a back rig for the wings for the jetpack to fit over and will update the folder when those blueprints are available.
Updated as of 6/16/22
READ BEFORE BUYING!
*This is only a PATTERN for the wings, not the wings themselves*
This pack includes:
- Wing templates (PDF format)
- Wing layout reference (PDF format)
- 3D files for wing hinges
- link to my custom Cricut patterns
- part list
- instructions
- 3D file for my custom modeled jetpack
*files are accessible via google drive link in a word doc. this is what you will receive when you purchase, message me if you have trouble accessing anything!*
KEEP IN MIND: This is a complex build. I have been building these for a while now, they're time consuming and very tedious/detail oriented. The blueprints are also not finished since I am designing as I go, which is why this file is so cheap. Since it is one of the only patterns for the wings out there though, I wanted to make it available for those who wanted to try it out for themselves.
The parts listed are not required for this build but are recommended, as they are what I used to make moving pulley activated wings. You can make the wings fully solid by choice. They are just suggestions based on what I have been doing for my commission build.
I recommend AT LEAST a 30% infill for the hinge pieces, printed in a strong material such as PETG as it will need to be a strong part, and a lower infill for the jetpack to help make it light.
Make sure if you scale the wings you also scale the jetpack file to match! everything is 1:1 as is.
*Print template file in POSTER MODE, this will give you a ton of sheets but this is how you print it to scale.*
I am currently in the process of designing a back rig for the wings for the jetpack to fit over and will update the folder when those blueprints are available.
Updated as of 6/16/22
*This is only a PATTERN for the wings, not the wings themselves*
This pack includes:
- Wing templates (PDF format)
- Wing layout reference (PDF format)
- 3D files for wing hinges
- link to my custom Cricut patterns
- part list
- instructions
- 3D file for my custom modeled jetpack
*files are accessible via google drive link in a word doc. this is what you will receive when you purchase, message me if you have trouble accessing anything!*
KEEP IN MIND: This is a complex build. I have been building these for a while now, they're time consuming and very tedious/detail oriented. The blueprints are also not finished since I am designing as I go, which is why this file is so cheap. Since it is one of the only patterns for the wings out there though, I wanted to make it available for those who wanted to try it out for themselves.
The parts listed are not required for this build but are recommended, as they are what I used to make moving pulley activated wings. You can make the wings fully solid by choice. They are just suggestions based on what I have been doing for my commission build.
I recommend AT LEAST a 30% infill for the hinge pieces, printed in a strong material such as PETG as it will need to be a strong part, and a lower infill for the jetpack to help make it light.
Make sure if you scale the wings you also scale the jetpack file to match! everything is 1:1 as is.
*Print template file in POSTER MODE, this will give you a ton of sheets but this is how you print it to scale.*
I am currently in the process of designing a back rig for the wings for the jetpack to fit over and will update the folder when those blueprints are available.
Updated as of 6/16/22