Ghost Rider Helmet
Become the Spirit of Vengeance with this fully animated 3D-printed mask! The LEDs run off of a rechargeable 20,000 mAh power bank to ensure a full event’s wear! The mask is held together on the user’s head via neodymium magnets in the fire and skull portion. In all options below, the fire portion is printed in transparent PLA.
These are made to order - Please allow 3-4 weeks processing time!
PLEASE READ THE DESCRIPTIONS BELOW TO SEE WHAT EACH FINISH OPTION INCLUDES!
Finished Helmet Resin $950- This includes a skull portion printed in ABS-Like resin, ensuring maximum detail in the print. It is meticulously painted by hand and the jaw is fitted with elastic to open and close with the wearer’s jaw. Polarized sunglass lenses are installed in the eye sockets. The fire portion is fully sealed with LEDs, diffusion, and magnets installed.
Finished Helmet PLA+ $900- This includes a skull portion printed in PLA+, which is a stronger filament than standard PLA. It is meticulously painted by hand and the jaw is fitted with elastic to open and close with the wearer’s jaw. Polarized sunglass lenses are installed in the eye sockets. The fire portion is fully sealed with LEDs, diffusion, and magnets installed.
Unfinished Resin Skull + Finished Fire $750- This option features an UNPAINTED skull printed in ABS-Like resin to ensure maximum detail in print. Minimal sanding is required due to the detail of the resin print! Elastic and uncut polarized sunglass lenses are included but NOT INSTALLED for ease of sanding and painting the skull and jaw yourself. Foam gaskets are included to be glued around the interior eye sockets to protect the wearer’s face. The fire portion is fully sealed with LEDs, diffusion, and magnets installed.
Unfinished PLA+ + Finished Fire $675- This option features an UNPAINTED skull printed in PLA+. Elastic and uncut polarized sunglass lenses are included but NOT INSTALLED for ease of sanding and painting the skull and jaw yourself. Foam gaskets are included to be glued around the interior eye sockets to protect the wearer’s face. The fire portion is fully sealed with LEDs, diffusion, and magnets installed.
Unfinished Resin Skull + Unfinished Fire $450- This option features an UNPAINTED skull printed in ABS-Like resin, ensuring maximum detail in the print. Minimal sanding is required due to the detail of the resin print! Elastic and uncut polarized sunglass lenses are included but NOT INSTALLED for ease of sanding and painting the skull and jaw yourself. Foam gaskets are included to be glued around the interior eye sockets to protect the wearer’s face. The fire portion REQUIRES ASSEMBLY via plastic fusing the pieces together. Cotton sheeting is included for diffusion. A pre-programmed 5V Adafruit Trinket Pro is included with LEDs pre-wired to the board. The LEDs are not installed in the fire portion and will have to be glued in via the included LED cradles.
Unfinished PLA+ Skull + Unfinished Fire $375- This option features an UNPAINTED skull printed in PLA+. Elastic and uncut polarized sunglass lenses are included but NOT INSTALLED for ease of sanding and painting the skull and jaw yourself. Foam gaskets are included to be glued around the interior eye sockets to protect the wearer’s face. The fire portion REQUIRES ASSEMBLY via plastic fusing the pieces together. Cotton sheeting is included for diffusion. A pre-programmed 5V Adafruit Trinket Pro is included with LEDs pre-wired to the board. The LEDs are not installed in the fire portion and will have to be glued in via the included LED cradles.
Become the Spirit of Vengeance with this fully animated 3D-printed mask! The LEDs run off of a rechargeable 20,000 mAh power bank to ensure a full event’s wear! The mask is held together on the user’s head via neodymium magnets in the fire and skull portion. In all options below, the fire portion is printed in transparent PLA.
These are made to order - Please allow 3-4 weeks processing time!
PLEASE READ THE DESCRIPTIONS BELOW TO SEE WHAT EACH FINISH OPTION INCLUDES!
Finished Helmet Resin $950- This includes a skull portion printed in ABS-Like resin, ensuring maximum detail in the print. It is meticulously painted by hand and the jaw is fitted with elastic to open and close with the wearer’s jaw. Polarized sunglass lenses are installed in the eye sockets. The fire portion is fully sealed with LEDs, diffusion, and magnets installed.
Finished Helmet PLA+ $900- This includes a skull portion printed in PLA+, which is a stronger filament than standard PLA. It is meticulously painted by hand and the jaw is fitted with elastic to open and close with the wearer’s jaw. Polarized sunglass lenses are installed in the eye sockets. The fire portion is fully sealed with LEDs, diffusion, and magnets installed.
Unfinished Resin Skull + Finished Fire $750- This option features an UNPAINTED skull printed in ABS-Like resin to ensure maximum detail in print. Minimal sanding is required due to the detail of the resin print! Elastic and uncut polarized sunglass lenses are included but NOT INSTALLED for ease of sanding and painting the skull and jaw yourself. Foam gaskets are included to be glued around the interior eye sockets to protect the wearer’s face. The fire portion is fully sealed with LEDs, diffusion, and magnets installed.
Unfinished PLA+ + Finished Fire $675- This option features an UNPAINTED skull printed in PLA+. Elastic and uncut polarized sunglass lenses are included but NOT INSTALLED for ease of sanding and painting the skull and jaw yourself. Foam gaskets are included to be glued around the interior eye sockets to protect the wearer’s face. The fire portion is fully sealed with LEDs, diffusion, and magnets installed.
Unfinished Resin Skull + Unfinished Fire $450- This option features an UNPAINTED skull printed in ABS-Like resin, ensuring maximum detail in the print. Minimal sanding is required due to the detail of the resin print! Elastic and uncut polarized sunglass lenses are included but NOT INSTALLED for ease of sanding and painting the skull and jaw yourself. Foam gaskets are included to be glued around the interior eye sockets to protect the wearer’s face. The fire portion REQUIRES ASSEMBLY via plastic fusing the pieces together. Cotton sheeting is included for diffusion. A pre-programmed 5V Adafruit Trinket Pro is included with LEDs pre-wired to the board. The LEDs are not installed in the fire portion and will have to be glued in via the included LED cradles.
Unfinished PLA+ Skull + Unfinished Fire $375- This option features an UNPAINTED skull printed in PLA+. Elastic and uncut polarized sunglass lenses are included but NOT INSTALLED for ease of sanding and painting the skull and jaw yourself. Foam gaskets are included to be glued around the interior eye sockets to protect the wearer’s face. The fire portion REQUIRES ASSEMBLY via plastic fusing the pieces together. Cotton sheeting is included for diffusion. A pre-programmed 5V Adafruit Trinket Pro is included with LEDs pre-wired to the board. The LEDs are not installed in the fire portion and will have to be glued in via the included LED cradles.
Become the Spirit of Vengeance with this fully animated 3D-printed mask! The LEDs run off of a rechargeable 20,000 mAh power bank to ensure a full event’s wear! The mask is held together on the user’s head via neodymium magnets in the fire and skull portion. In all options below, the fire portion is printed in transparent PLA.
These are made to order - Please allow 3-4 weeks processing time!
PLEASE READ THE DESCRIPTIONS BELOW TO SEE WHAT EACH FINISH OPTION INCLUDES!
Finished Helmet Resin $950- This includes a skull portion printed in ABS-Like resin, ensuring maximum detail in the print. It is meticulously painted by hand and the jaw is fitted with elastic to open and close with the wearer’s jaw. Polarized sunglass lenses are installed in the eye sockets. The fire portion is fully sealed with LEDs, diffusion, and magnets installed.
Finished Helmet PLA+ $900- This includes a skull portion printed in PLA+, which is a stronger filament than standard PLA. It is meticulously painted by hand and the jaw is fitted with elastic to open and close with the wearer’s jaw. Polarized sunglass lenses are installed in the eye sockets. The fire portion is fully sealed with LEDs, diffusion, and magnets installed.
Unfinished Resin Skull + Finished Fire $750- This option features an UNPAINTED skull printed in ABS-Like resin to ensure maximum detail in print. Minimal sanding is required due to the detail of the resin print! Elastic and uncut polarized sunglass lenses are included but NOT INSTALLED for ease of sanding and painting the skull and jaw yourself. Foam gaskets are included to be glued around the interior eye sockets to protect the wearer’s face. The fire portion is fully sealed with LEDs, diffusion, and magnets installed.
Unfinished PLA+ + Finished Fire $675- This option features an UNPAINTED skull printed in PLA+. Elastic and uncut polarized sunglass lenses are included but NOT INSTALLED for ease of sanding and painting the skull and jaw yourself. Foam gaskets are included to be glued around the interior eye sockets to protect the wearer’s face. The fire portion is fully sealed with LEDs, diffusion, and magnets installed.
Unfinished Resin Skull + Unfinished Fire $450- This option features an UNPAINTED skull printed in ABS-Like resin, ensuring maximum detail in the print. Minimal sanding is required due to the detail of the resin print! Elastic and uncut polarized sunglass lenses are included but NOT INSTALLED for ease of sanding and painting the skull and jaw yourself. Foam gaskets are included to be glued around the interior eye sockets to protect the wearer’s face. The fire portion REQUIRES ASSEMBLY via plastic fusing the pieces together. Cotton sheeting is included for diffusion. A pre-programmed 5V Adafruit Trinket Pro is included with LEDs pre-wired to the board. The LEDs are not installed in the fire portion and will have to be glued in via the included LED cradles.
Unfinished PLA+ Skull + Unfinished Fire $375- This option features an UNPAINTED skull printed in PLA+. Elastic and uncut polarized sunglass lenses are included but NOT INSTALLED for ease of sanding and painting the skull and jaw yourself. Foam gaskets are included to be glued around the interior eye sockets to protect the wearer’s face. The fire portion REQUIRES ASSEMBLY via plastic fusing the pieces together. Cotton sheeting is included for diffusion. A pre-programmed 5V Adafruit Trinket Pro is included with LEDs pre-wired to the board. The LEDs are not installed in the fire portion and will have to be glued in via the included LED cradles.
